send link to app

FLUIDLOGIC


4.8 ( 1408 ratings )
Forme et santé
Développeur RAINMAKER SOLUTIONS, INC.
Libre

Fluidlogic - Hydration for the Human Race


- Control your FLUIDLOGIC Motorsports System and adjust your personal hydration profile for peak performance at speed.
- Control single or multiple systems - perfect for individuals or race teams.
- Choose from preset hydration profiles or create your own to maximize your performance.


The system has two modes of operation: MANUAL and SEMI-AUTO

MANUAL MODE
Enables the VOLUME (1-10ml) and STRENGTH (low-med-high) adjustment sliders
The VOLUME slider controls the “dose” of fluid you get with each button tap. A quick tap of the Microbutton will give you your selected “dose”, while pressing and holding the Microbutton will give you fluid as long as the button is held down
- The STRENGTH slider controls how forceful and fast the “dose” is delivered
- Under the “Advanced Configuration” you can adjust only the Idle LED Brightness


SEMI-AUTO MODE
VOLUME and STRENGTH adjustment sliders remain the same, but now you can utilize our REMINDER SYSTEM by setting how often to be alerted by the Microbutton LED to take a dose of fluid.
- The INTERVAL slider controls the amount of time between dose reminders. Set it for 30 sec, and the Microbutton LED will blink to alert you @30 sec to take a dose of fluid. After a few blinking cycles, the LED will remain on until you press it. Pressing the button will restart the alert cycle.
- Under the “Advanced Configuration” you can adjust both the Idle LED and Alert LED Brightness

CONNECTION TO THE POD
The FLUIDLOGIC MOTORSPORTS SYSTEM comes with an “default” setting and can be used without connection to the APP, but tuning the system to your individual preferences will result in optimal hydration.

To connect the POD to the FLUIDLOGIC APP, navigate to the “Add New Device” screen and press the + to scan either the QR Code printed on the card that came with the product or on the back of the POD. You can also manually enter the code. Once registered, you can personalize your system with a name and profile image. Now the “Device Setup” screen is ready for your individual hydration profile.